Player Profiles Overview
You have 3 different player profiles, each with its own LED color:
● Profile 1 – Blue LED
● Profile 2 – Pink LED
● Profile 3 – Aqua LED

Each profile includes:
● Stick Control (toggle + adjustable values)
● Swinging (toggle + adjustable values)
● Batting (toggle + adjustable values)
● Pitching (toggle + adjustable values)
● Fielding (toggle + adjustable values)

All profiles have access to all 5 systems:
Stick Control, Swinging, Batting, Pitching, Fielding

Temporary Values (Fine-Tuning)
Each of the 3 profiles has a Temp Value used for fine adjustments.
● Temp Value is added to or subtracted from the pre-stored value.
● This lets you fine-tune your timing without editing the base value.
Cronus Zen Central MLB 25 – User Guide

● Temp Value is profile-dependent.

▶ Important:
If you change the player assigned to a profile, reset the Temp Value for that profile.
Reset Temp Values (active profile only):
→ From ModPlayer, hold CROSS/A for 500ms
You can write down the adjusted values and then edit the corresponding arrays in the script
later.
That way, when you switch team or player in-game, your timing is already perfectly adjusted.
Player Name Limit: Up to 11 characters.

Profile Features – Adjustable Systems
Batting
When you set the stick, then press X/Square, the script will run the batting timing you
configured (hold + release).
How to use Batting:
1. Aim/position the stick where you want it.
2. Once the stick is set, press X/Square.
3. The script runs your pre-set timing for the batting hold and release.

Best practice: time the swing after the stick is set in the desired position.

Swinging
When you press X/Square, it performs a timed swing using the values you set.
● Best results come from timing the swing based on the pitcher’s release.
● Use the timings to get a consistent, repeatable swing window.

Hitting View Tip (for pitch tracking)
If you struggle to read pitches, changing your Hitting View helps a lot:
● Strike Zone / Strike Zone 2
○ Most popular for competitive players
○ Maximum visibility on the pitcher and ball
○ Less presentation, more performance
● Strike Zone 3
○ Good balance of presentation and visibility

Swing Types (Controller Inputs)
● Normal Swing – X Button
○ Your main swing type
○ Good contact + power, depending on stats
○ Solid plate coverage if PCI is on target
○ Recommended most of the time
● Power Swing – Square Button
○ Use sparingly, mainly when ahead in the count (e.g., 3–0, 2–0)
○ Harder timing, reduced plate coverage
○ High risk, high reward

Fielding

Hold Left Trigger (LT/L2) and press a face button to throw to a base, using timed
throws you configure.
● B/Circle → Throw to 1st base (timed)
● Y/Triangle → Throw to 2nd base (timed)
● Cross/X → Throw to 3rd base (timed)
● L1 (Bumper) → Throw to 4th/Home (timed)

You can adjust the timing values for each base to match your preference or difficulty level.

Pitching
When Pitching is enabled, the script will apply your configured hold/release timings
based on your inputs:
● If the right stick is pushed up
→ Uses Pitching timing (hold + release)
● If the shot button is pressed
→ Uses Pitching 1 timing (hold1 + release1)
● If the right stick is pushed down
→ Uses Pitching 2 timing (hold2 + release2)

You can set different timings for different pitch types or scenarios.

Warning – Mod Usage
WARNING:
We strongly recommend using only one mod active at a time.
● Multiple mods running together can conflict and cause issues.
● Use quick toggles to switch mods ON/OFF as needed once they are enabled in the
menu.

Global Features
These settings affect the script globally (not just per profile).
Button Layout
Match your in-game button configuration to the script so everything triggers correctly with your
custom layout.
Stick Layout
Match your stick layout (e.g., analog movement) to the script to ensure all mechanics respond
correctly.
Rumbles
● Disables all controller vibration and adaptive trigger feedback.
● In-game, rumble must be turned ON, and adaptive/haptic triggers should be enabled if
available.

VM Control (Cronus Zen VM Speed)
Adjusts the Virtual Machine speed (script update rate):
● Can improve input lag, delay, and timing feel.
● Each console often feels best at a different VM speed, but you can experiment.

Platform Value Approx.
Speed
Default 0 10 ms
Xbox One 1 8 ms
PS4 2 6 ms
PS5 3 4 ms

Xbox Series 4 2 ms
PC 5 1 ms

Global Toggles & Quick Functions
KillSwitch (Disable Everything)
In menus, some mods might run (e.g., sprint-type features in other scripts).
Use the KillSwitch to fully disable or re-enable the script.
Toggle KillSwitch ON/OFF:
● Hold Left Trigger (L2/LT) and tap PS Button / Xbox Button

Turn OFF KillSwitch (re-enable everything):
● Double tap Circle/B
● Hold Circle/B for more than 600ms
● Hold Square/X for more than 1000ms (menu only)

Resync Button
Resync active profile:
● Hold L3/LS and tap Triangle/Y

Speed Toggle (Quick Mod Toggles for Active Profile)
Outside of Mod Menu/Edit/Player:
Hold your aiming button and hold for 300ms in a direction:

● UP → Pitching
● DOWN → Stick Control
● LEFT → Batting
● RIGHT → Swing

This lets you quickly toggle between main systems without going into the full Mod Menu.

Speed Swap (Team & Player)
Outside of menus:
● Hold R3/RS and tap:
○ UP/DOWN → Change Team
○ LEFT/RIGHT → Change Player

Menus & Navigation
Mod Menu
Open/Close Mod Menu:
→ L2/LT + OPTIONS/MENU
Inside Mod Menu:
● Choose Profile (1, 2, 3):
→ Tap Triangle/Y
● Navigate Mods:
→ DPAD LEFT/RIGHT
● Turn Mods ON/OFF:
→ DPAD UP/DOWN

● If the mod has editable values:
→ Tap Cross/A to go to ModEdit
● To go to ModPlayer:
→ Tap Square/X
● Save all adjustments/settings:
→ Double press B/Circle (you’ll see “SAVED”)

ModEdit
(Accessed from Mod Menu by tapping Cross/A on a mod with editable values)
● Navigate between values: LEFT/RIGHT
● Change a value: Hold Cross/A and:
○ Tap UP/RIGHT → increase
○ Tap DOWN/LEFT → decrease
● Exit ModEdit and return to Mod Menu:
→ Tap Circle/B
● Close all Menus:
→ Hold L2/LT and tap PS/XBOX or double tap B/Circle

ModPlayer
(Accessed from Mod Menu by tapping Square/X)
● Select profile (1, 2, 3):
→ Tap Triangle/Y
● Switch Teams:
→ DPAD UP/DOWN

● Switch Players:
→ DPAD LEFT/RIGHT
● Reset Temp Values (active profile):
→ Hold Cross/A for 500ms
● Exit ModPlayer and return to Mod Menu:
→ Tap Circle/B
● Close all menus:
→ Double tap B/Circle

Saving & Profiles
Save All & Exit
To save:
● All values
● All toggles
● Character & player selections
● For every profile independently

→ Double tap B/Circle

Profile Switching (In-Game & Menus)
In Game:
● Tap DPAD DOWN to cycle:
→ Profile 1 → Profile 2 → Profile 3 → (loops)

In Menus (Mod Menu / Edit / Player):

● Tap DPAD DOWN to loop:
→ 1 → 2 → 3 → 1 → 2 → 3 → …

Quick Profile Selection (LED Colors)
● Player 1 (Blue Zen LED Eyes):
→ Hold DPAD LEFT + tap X/Square
● Player 2 (Pink Zen LED Eyes):
→ Hold DPAD LEFT + tap Y/Triangle
● Player 3 (Aqua Zen LED Eyes):
→ Hold DPAD LEFT + tap B/Circle